DB Drive Support Got questions? We got answers, hit us up right here.

Enclosure

PRODUCT MANUALS
TECH SPECS

Enclosure Types
Before Deciding on a particular type of enclosure to use, you must first determine the amount of space you have available. This is a very important step to ensure you have the appropriate volume needed to provide proper performance of the subwoofer. For example, if you wish to build an enclosure for a 15″ and you only have one cubic foot space available, it would be better to use a 10″ because the volume is not large enough to allow the 15″ to perform properly. The small enclosure would restrict the performance of the 15″ not allowing it properly reproduce low frequencies.Sealed Enclosure:

gr-sealed

Advantage: Easy to build. Smaller enclosure size, lean tight sounding bass, better power handling vs. ported design and linear low bass extension.

Disadvantage: Less efficient as compared to ported design.

 

Ported Enclosure (Bass Reflex):

gr-ported

Advantage: More output at the tuning frequency as comparered to the same woofer in a sealed enclosure. Higher efficiency.

Disadvantage: Larger enclosure size, calculating enclosure and port dimensions more difficult, easy to blow woofer if power handling limit is exceeded.

 

Bandpass Enclosure (4th Order):

gr-bandpass

Advantage: Bandpass can be designed to play loud or low depending on your needs, by design produce a limited band with, the woofer cone does not move as much as other designs reducing the chance of added distortion.

Disadvantage:┬áBandpass boxes have a tendency to sound boomy not tight, typically these enclosures don’t sound as good reproducing music requiring great detail such as jazz or classical music.

Enclosure Material

It is recommended to build your enclosure from 3/4″ thick MDF (medium density fiberboard). Make sure the enclosure is sealed air tight.

Calculating External Enclosure Volume

To calculate box volume, measure the outside width X height X depth of enclosure.

Example:
12″ X 14″ X 9″ = 1512″

Next, you must convert cubic inches into cubic feet. To do this, you must divide the cubic inch total by 1728″.

Example:
1512″ / 1728″ = .875 CUBIC FEET

Calculating Internal Enclosure Volume

To calculate the internal (net) volume of the above box, you must first multiply the thickness of the wood you are using by two (2).

Example
3/4″ X 2 = 1.5″

Next, subtract 1.5 from each of the outside measurements of the box.

Example:
(WIDTH) 12 – 1.5 = 10.5 (HEIGHT) 14 – 1.5 = 12.5 (DEPTH) 9 – 1.5 = 7.5

Multiply the new totals (W X H X D)

Example:
10.5 X 12.5 X 7.5 = 984.375

Finally, you must convert cubic inches into cubic feet. to do this, you must divide the cubic inch total by 1728^

Example:
984.375 / 1728 = .5696 CUBIC FEET