fbpx
EWX8NEO

$449.99

-

 

Download Manual

 

California Prop 65 WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov

Dont have a PayPal account? No problem, just click the yellow button and a small window will pop up. Scroll down and you'll see "Pay with Debit or Credit Card."
000

Our engineers at DB Drive have designed this subwoofer from the ground up to shake the ground up. The double-stitched foam surround along with the die-cast aluminum vented basket allows for maximum excursion while the protective magnet cover gives the woofer a rugged yet stylish appearance.

    • 2″ High-temperature voice coil
    • N38 Neodymium Motor Design
    • Pulp Fiber Reinforced Cone
    • Multi-Layer Foam Surround
    • Progressive Dampeners
    • 3.2Ω DVC

Physical Structure

Outside Diameter (A) 8.75″ (222.5mm)
Cutout Diameter (B) 7.17″ (182.3mm)
Mounting Depth (C) 5.06″ (128.6mm)
General Specifications
Structure 8″ (20.32cm) Woofer
Dynamic Power Handling 600 Watts
Nominal Power Handling 300 Watts
Impedance Dual 3.2Ω Voice Coil
Parameters
Resonant Frequency (fs) 50.26Hz
D.C. Voice Coil Resistance (Re) 3.2Ω + 3.2Ω
Mechanical Quality Factor (Qms) 1.975
Electrical Quality Factor (Qes) 0.789
Total Quality Factor (Qts) 0.564
Equivalent Air Volume to Cms (Vas) 5.248
Mass of Diaphragm/Coil (Mms) 124.032 g
Force Factor (Bl) 8.911 N/A

Recommended Enclosures

Woofer Cut-out 7.17″ (182.3mm)
Mounting Depth 5.06″ (28.6mm)
Sealed Box 0.5 ft3 (14.15L)
Vented Box 0.6 ft3 (16.9L)
Vent Area 3 in2 (19.35 cm2)
Vent Length 24″ (60.96 cm)
Tuning 39Hz
Dynamic Power 600 Watts
Nominal Power 300 Watts

Wiring Configuration

You can change the wiring configuration of your speakers (Series, Parallel and Series / Parallel) to match the impedance loads that maximizes the power output of you amplifier. Wiring the same woofer or multiple woofers in these three different wiring configurations will result in different impedance loads.

Series: Is the method of wiring of alternate positive with negative terminals (string method) (Illustration below)

Parallel:Is the method of wiring where you wire match 2 speaker terminals with positive to positive terminal and negative to negative. (Illustration below)

Series/Parallel: This configuration is a combination of both series and parallel. We recommend series for the terminal and parallel for the leads to amp. (Illustration below).

2 Ohm DVC Configuration

4 Ohm DVC Configuration