fbpx
EXW10CF

EXW10CF

$479.98

-

10″ Carbon Fiber Ferrite Woofer

Download Manual

 

California Prop 65 WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov

Dont have a PayPal account? No problem, just click the yellow button and a small window will pop up. Scroll down and you'll see "Pay with Debit or Credit Card."
Categories: ,
000

• 10″ Carbon Fiber Ferrite Woofer
• 3″ voice coil
• Die-Cast Aluminum Basket
• Large Gauge Compression Terminals
• Foam Surround
• Ferrite Magnet
• Weather Resistant Carbon Fiber Cone
• PVC gasket
• Dual 2Ω 8 Layer Voice Coil

Physical Structure

Outside Diameter (A) 10.90″ (277mm)
Cutout Diameter (B) 9.37″ (238.11mm)
Mounting Depth (C) 6.10″ (155mm)
General Specifications
Power Handling 1000 Watts
Dynamic Wattage 2000 Watts
Frequency Response 41.328Hz
Sensitivity (1w/1m) 83.1dB
Impedance 1.8Ω + 1.8Ω

Recommended Enclosures

Woofer Cut-out 9.37″ (238.11mm)
Mounting Depth 6.10″ (155mm)
Sealed Box 1.1 ft3 (31.14L)
Vented Box 1.53 (42.47L)
Vent Area 102 (64.512)
Vent Length 10″ (25.4cm)
Tuning 39Hz
Dynamic Power 2000 Watts
Nominal Power 1000 Watts

Wiring Configuration

You can change the wiring configuration of your speakers (Series, Parallel and Series / Parallel) to match the impedance loads that maximizes the power output of you amplifier. Wiring the same woofer or multiple woofers in these three different wiring configurations will result in different impedance loads.

Series: Is the method of wiring of alternate positive with negative terminals (string method) (Illustration below)

Parallel:Is the method of wiring where you wire match 2 speaker terminals with positive to positive terminal and negative to negative. (Illustration below)

Series/Parallel: This configuration is a combination of both series and parallel. We recommend series for the terminal and parallel for the leads to amp. (Illustration below).

2 Ohm DVC Configuration

Related products