EX6NCX
EX6NCX
$499.95
EX6NCX 6.5″ Neodymium Series Midrange 2-Way Loudspeaker
Features
- 2″ (51mm) Midrange Voice Coil
- Neodymium Ring Magnet Assembly
- IP52 Rateed Paper Cone With Treated Cloth Surround
- Die-Cast Aluminum Basket With Radial Venting
- Wide Dispersion 1.25″ (28mm) Aluminum Dome Tweeter
- Protective Grills Included
Specifications
| Nominal Impedance | 4Ω |
| Power Handling | 225 Watts |
| Dynamic Wattage | 450 Watts |
| Frequency Response | 85Hz ~ 19kHz |
| Sensitivity (1w/1m) | 97.6dB |
| Voice Coil Diameter | 2″ (51mm) |
Thiele-Small Parameters
| Resonant Frequency (fs) | 104.9Hz |
| D.C. Voice Coil Resistance (Re) | 3.2Ω |
| Mechanical Quality Factor (Qms) | 6.39 |
| Electrical Quality Factor (Qes) | 0.24 |
| Total Quality Factor (Qts) | 0.23 |
| Equivalent Air Volume to Cms (Vas) | 7.9L |
| Mechanical Compliance (Cms) | 0.28 mm/N |
Driver Composition
| Voice Coil Wire | CCAW |
| Coil | Polyamide |
| Magnet | Neodymium |
| Basket Type | Die-Cast Aluminum |
| Surround Edge | Cloth |
| Cone Material | Paper |
Dont have a PayPal account? No problem, just click the yellow button and a small window will pop up. Scroll down and you'll see "Pay with Debit or Credit Card."
Add a Review
Be the first to review “EX6NCX”
Quickview
$649.99
EX2K
Xpert, Xpert Amplifiers
EX2K 2000 Watt Full Range Class D Monoblock Amplifier
Features
- Audiophile Grade tiffany RCA connectors
- Buffered full range RCA pass through outputs
- Selectable Low-Pass, Band-Pass or High-Pass x-over
- High efficiency full range Class D Technology
- Direct Connect Speaker Terminals
- Large Gauge Power Wire Inputs
- Speaker Short Circuit Protection
- Conformal coated moisture resistant PCB
Voltage
| 4Ω @ 14.4 Volts: | 1 x 500 Watts |
| 2Ω @ 14.4 Volts: | 1 x 1000 Watts |
| 1Ω @ 14.4 Volts: | 1 x 2000 Watts |
| Capability: | 1Ω Mono |
Specifications
| Working Voltage: | 10 ~ 16Volts |
| Frequency Response: | 20Hz ~ 35kHz |
| Signal to Noise Ratio: | <95dB |
| Damping Factor: | 150 dB< |
| Low Level Input: | 6V ~ 0.2V |
| High Pass Filter Variable: | 20Hz ~ 8kHz |
| Low Pass Filter Variable: | 50Hz ~ 8kHz |
| Minimum Working Impedance: | 1Ω Mono |
Quickview
$239.95
EXM6N-CF
Xpert, Xpert MidrangesEXM6N-CF 6.5" NEO Carbon Fiber Midrange
Features
• 6.5" Neo Carbon Fiber midrange • 2.0" (51mm) Midrange Voice Coil • 10 Neodymium Ring Magnet Assembly • IP65 Rated Weather Resistant Carbon Fiber Cone with Rubber Surround • Die-Cast Aluminum Basket with Radial VentingSpecifications
| Nominal Impedance | 4Ω |
| Power Handling | 200 Watts |
| Dynamic Wattage | 400 Watts |
| Frequency Response | 85Hz ~ 11kHz |
| Sensitivity (1w/1m) | 98.1dB |
| Voice Coil Diameter | 2" (51mm) |
Dimensions
• Mounting Depth: 3.03" / 77mm • Cutout Diameter: 5.71" / 145mm
Quickview
$1,249.95
EX10NCD
Xpert, Xpert Speakers
EX10NCD NEODYMIUM Series 10” 2-WAY LOUDSPEAKERS
Features
- 2.5" (63.5mm) Midrange Voice Coil
- Neodymium Ring Magnet Assembly
- Rear Mounted Full Sized Compression Driver
- IP52 Rateed Paper Cone With Treated Cloth Surround
- Die-Cast Aluminum Basket With Radial Venting
- 1.4" (36mm) Polyester Tweeter Diaphragm
- Wide Dispersion Conical HF Waveguide
- 12dB Passive Crossover Included
- Protective Grills Included
Specifications
| Nominal Impedance | 5.2Ω |
| Power Handling | 500 Watts |
| Dynamic Wattage | 1000 Watts |
| Frequency Response | 70Hz ~ 20kHz |
| Sensitivity (1w/1m) | 106.1dB |
| Voice Coil Diameter | 2" (51mm) |
Driver Composition
| Voice Coil Wire | CCAW |
| Coil | Polyamide |
| Magnet | Neodymium |
| Basket Type | Die-Cast Aluminum |
| Surround Edge | Cloth |
| Cone Material | Paper |
Quickview
$1,259.95
EX8.4
Xpert, Xpert Amplifiers
EX8.4 1600 Watt Full Range Class D 4 Channel Amplifier
Features
• Audiophile Grade Tiffany RCA connectors • Selectable Low-Pass, Band-Pass or High-Pass crossover • High efficiency full range class D technology • Direct Connect Speaker terminals • Large Gauge Power Wire Inputs • Speaker Short Circuit Protection • Conformal coated moisture resistant PCBVoltage
| 4Ω @ 14.4 Volts: 4 x 200 Watts @ 4ohm | |
| 2Ω @ 14.4 Volts: 4 x 400 Watts @ 2ohm | |
| 4Ω Bridged: 2 x 350 Watts |
Specifications
| Working Voltage: | 10 ~ 16Volts |
| Frequency Response: | 20Hz ~ 30KHz |
| Signal to Noise Ratio: | <62dB |
| Damping Factor: | 100 dB< |
| Low Level Input: | 6V ~ 0.2V |
| High Pass Filter Variable: | 20Hz ~ 5KHz |
| Low Pass Filter Variable: | 50Hz ~ 5KHz |
| Minimum Working Impedance: | 2Ω Stereo |
Reviews(0)
There are no reviews yet.