12″ Shallow Mount NEO Carbon Fiber Woofer

Download Manual


California Prop 65 WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov

Dont have a PayPal account? No problem, just click the yellow button and a small window will pop up. Scroll down and you'll see "Pay with Debit or Credit Card."
Categories: ,

• 12″ Shallow Mount Neo Carbon Subwoofer
• 2.5″ Voice Coil
• Die-Cast Aluminum Basket with Radial Venting
• Large Gauge Compression Terminals
• Rubber Surround
• Carbon Fiber Cone
• Neodymium Magnet
• Weather Resistant Cone and Surround
• PVC Gasket
• Dual 4Ω 4 Layer Voice Coil

Physical Structure

Outside Diameter (A) 12.72″ (323mm)
Cutout Diameter (B) 11.5″ (292mm)
Mounting Depth (C) 4.19″ (106.30mm)
General Specifications
Power Handling 500 Watts
Dynamic Wattage 1200 Watts
Frequency Response 33.791Hz
Sensitivity (1w/1m) 86.3dB
Impedance 3.6Ω + 3.6Ω

Recommended Enclosures

Woofer Cut-out 11.5″ (292mm)
Mounting Depth 4.19″ (106.30mm)
Sealed Box 0.92 ft3 (26.05L)
Vented Box 1.10 ft3 (31.14L)
Vent Area 9.62 in2 (62.06 cm2)
Vent Length 18″ (45.72cm)
Tuning 39Hz
Dynamic Power 1200 Watts
Nominal Power 500 Watts

Wiring Configuration

You can change the wiring configuration of your speakers (Series, Parallel and Series / Parallel) to match the impedance loads that maximizes the power output of you amplifier. Wiring the same woofer or multiple woofers in these three different wiring configurations will result in different impedance loads.

Series: Is the method of wiring of alternate positive with negative terminals (string method) (Illustration below)

Parallel:Is the method of wiring where you wire match 2 speaker terminals with positive to positive terminal and negative to negative. (Illustration below)

Series/Parallel: This configuration is a combination of both series and parallel. We recommend series for the terminal and parallel for the leads to amp. (Illustration below).

2 Ohm DVC Configuration