EXM5N
EXM5N
$199.95
EXM5N 5.25″ Neodymium Series Midrange Die-Cast Basket
Features
- 1.5″ (38.1mm) Voice Coil
- Neodymium 8 Piece Radially Equalized Magnet Assembly
- IP52 Rated Paper Cone With Treated Cloth Surround
- Die-Cast Aluminum Basket With Radial Venting
Specifications
| Nominal Impedance | 4Ω |
| Power Handling | 175 Watts |
| Dynamic Wattage | 350 Watts |
| Frequency Response | 145Hz ~ 8kHz |
| Sensitivity (1w/1m) | 96.3dB |
| Voice Coil Diameter | 1.5″ (38.1mm) |
Dimensions
| Mounting Depth: | 2.6″ (66mm) |
| Mounting Diameter: | 4.65″ (118mm) |
| Basket Diameter: | 3.62″ (92mm) |
Thiele-Small Parameters
| Resonant Frequency (fs) | 182.2Hz |
| D.C. Voice Coil Resistance (Re) | 3Ω |
| Mechanical Quality Factor (Qms) | 9.42 |
| Electrical Quality Factor (Qes) | 0.45 |
| Total Quality Factor (Qts) | 0.43 |
| Equivalent Air Volume to Cms (Vas) | 1.3L |
| Mechanical Compliance (Cms) | 0.12 mm/N |
Driver Composition
| Voice Coil Wire | CCAW |
| Coil | Polyamide |
| Magnet | Neodymium |
| Basket Type | Die-Cast Aluminum |
| Surround Edge | Cloth |
| Cone Material | Paper |
Dont have a PayPal account? No problem, just click the yellow button and a small window will pop up. Scroll down and you'll see "Pay with Debit or Credit Card."
Add a Review
Be the first to review “EXM5N”
Quickview
$899.95
EX4.5
Xpert, Xpert Amplifiers
EX4.5 2250 Watt Full Range Class D 5 Channel Amplifier
Features
- Audiophile Grade tiffany RCA connectors
- Selectable Low-Pass, Band-Pass or High-Pass x-over
- High efficiency full range Class D Technology
- Direct Connect Speaker Terminals
- Large Gauge Power Wire Inputs
- Speaker Short Circuit Protection
- Conformal coated moisture resistant PCB
Voltage
| 4Ω @ 14.4 Volts: 4 x 200 Watts + 1 x 725 watts @ 4ohm | |
| 2Ω @ 14.4 Volts: 4 x 400 Watts + 1 x 1000 Watts @ 2ohm | |
Specifications
| Working Voltage: | 10 ~ 16Volts |
| Frequency Response: | 20Hz ~ 30KHz ( CH1-CH4 ) / 10Hz ~ 500Hz ( CH5 ) |
| Signal to Noise Ratio: | <62dB |
| Damping Factor: | 100 dB< |
| Low Level Input: | 6V ~ 0.2V |
| High Pass Filter Variable: | 20Hz ~ 500Hz ( CH1-CH4 ) |
| Low Pass Filter Variable: | 20Hz ~ 500Hz ( CH1-CH4 ), 50Hz ~ 500Hz ( CH5 ) |
| Minimum Working Impedance: | 2Ω Stereo |
Quickview
EX6NCD-CF
Xpert, Xpert SpeakersEX6NCD-CF 6.5" 2-Way Carbon Fiber Loudspeaker
Features
• 6.5" 2-Way Carbon Fiber Loudspeaker • 2.0" (51mm) Midrange Voice Coil • 10 Neodymium Ring Magnet Assembly • Rear Mounted Full Sized Compression Driver • IP54 Rated Weather Resistant Carbon Fiber Cone with Rubber Surround • Die-Cast Aluminum Basket with Radial Venting • 1.4"(36mm) Polyester Tweeter Diaphragm • Wide Dispersion Conical HF Waveguide • 12dB Passive Crossover Included • Protective Grills IncludedSpecifications
| Nominal Impedance | 5.2Ω |
| Power Handling | 400 Watts |
| Dynamic Wattage | 800 Watts |
| Frequency Response | 80Hz ~ 20kHz |
| Sensitivity (1w/1m) | 105.7dB |
| Voice Coil Diameter | 2" (51mm) |
Dimensions
• Mounting Depth: 3.41" /86.64mm • Cutout Diameter: 5.75" / 146mm
Quickview
EX8NCD-CF
Xpert, Xpert SpeakersEX8NCD-CF 8" 2-Way Carbon Fiber Loudspeaker
Features
• 8" 2-Way Carbon Fiber Loudspeaker • 2.0" (51mm) Midrange Voice Coil • 10 Neodymium Ring Magnet Assembly • Rear Mounted Full Sized Compression Driver • IP54 Rated Weather Resistant Carbon Fiber Cone with Rubber Surround • Die-Cast Aluminum Basket with Radial Venting • 1.4"(36mm) Polyester Tweeter Diaphragm • Wide Dispersion Conical HF Waveguide • 12dB Passive Crossover Included • Protective Grills IncludedSpecifications
| Nominal Impedance | 5.2Ω |
| Power Handling | 450 Watts |
| Dynamic Wattage | 900 Watts |
| Frequency Response | 80Hz ~ 20kHz |
| Sensitivity (1w/1m) | 105.7dB |
| Voice Coil Diameter | 2" (51mm) |
Dimensions
• Mounting Depth: 4.30" /109.47mm • Cutout Diameter: 7" / 179.64mm
Quickview
$569.95
EX4
Xpert, Xpert Amplifiers
EX4 800 Watt Full Range Class D 4 Channel Amplifier
Features
- Audiophile Grade tiffany RCA connectors
- Selectable Low-Pass, Band-Pass or High-Pass x-over
- High efficiency full range Class D Technology
- Direct Connect Speaker Terminals
- Large Gauge Power Wire Inputs
- Speaker Short Circuit Protection
- Conformal coated moisture resistant PCB
Voltage
| 4Ω @ 14.4 Volts: | 4 x 200 Watts |
| 2Ω @ 14.4 Volts: | 4 x 400 Watts |
| 4Ω (Bridged): | 2 x 350 Watts |
Specifications
| Working Voltage: | 10 ~ 16Volts |
| Frequency Response: | 20Hz ~ 30kHz |
| Signal to Noise Ratio: | <62dB |
| Damping Factor: | 100 dB< |
| Low Level Input: | 6V ~ 0.2V |
| High Pass Filter Variable: | 20Hz ~ 5kHz |
| Low Pass Filter Variable: | 50Hz ~ 5kHz |
| Minimum Working Impedance: | 2Ω Stereo |
Reviews(0)
There are no reviews yet.